Rue Notre-Dame Est : des arpenteurs en renfort de l'équipe de l'entrepreneur

Know your municipal infrastructure to maintain and renew it better

Topo3D provides municipalities and their contractors with the surveys that support asset management: a georeferenced inventory of streets and networks, layout of the work, as-built plans and monitoring of hydraulic structures.

Quebec municipalities manage water and sewer networks, streets, sidewalks, parks and hydraulic structures, a large share of which are reaching the end of their service life. Municipal and engineering organizations point out that a complete picture of these assets is often missing. Funding programs such as the TECQ also call for a structured approach to managing water assets. To prioritize the work, you first need to know what you own, where it is and what condition it is in. Topo3D supports municipalities and contractors from the initial survey through to the as-built plans, with georeferenced data ready for your GIS.

Prioritize with inventory data

A georeferenced survey of your streets and networks gives the asset manager a measured basis for ranking interventions.

Road work supported day to day

Our surveyors lay out and survey at the contractor's pace, and produce the as-built plans the municipality requires.

Hydraulic structures documented above and below the water

Dams, basins and watercourses are surveyed in a single operation, in a single coordinate system.

What is your challenge?

Pick the question that sounds like yours

Is your asset management plan based on a complete inventory?

The problem

The maintenance deficit for municipal water and road infrastructure in Quebec runs into the billions of dollars, and several organizations point to the lack of a complete picture. Without an up-to-date inventory, priorities are set based on old or incomplete records. The TECQ 2024-2028 also ties a funding top-up to the submission of the water asset management approach and plan.

Our solution

We survey the visible assets of your streets and networks, georeference them and deliver them in a format compatible with your GIS. Your engineer or asset manager then assesses condition, risk and priority.

What you gain
  • Inventory measured rather than estimated
  • Data that can be integrated into the municipal GIS
  • A solid basis for the PGA-Eau approach
Deliverables
GIS layers of georeferenced assetsclassified point cloudstructure location plan

How many catch basins, manholes, poles and signs are there in your territory?

The problem

Right-of-way inventories are often done on foot, street by street, and take months. The data ages before it is even complete, and discrepancies between the records and the field keep growing.

Our solution

A vehicle equipped with mobile LiDAR and cameras drives the streets at traffic speed. The point cloud and 360 images are used at the office to extract catch basins, manholes, poles, signs and curbs, along with their positions.

What you gain
  • Fast coverage of the road network
  • No prolonged traffic disruption
  • Dated visual record of the right-of-way
Deliverables
point cloud of the right-of-waygeoreferenced 360 imagesvector inventory by asset type
Related project: Circuit Gilles-Villeneuve: scanning and surveying for the repaving

Where do your pipes and trunk sewers run before you dig?

The problem

Underground network drawings are often approximate, especially for older structures. A mispositioned pipe delays excavation, forces a design review or puts workers at risk.

Our solution

We combine surface detection by ground-penetrating radar, 3D scanning of trunk sewers and culverts, and manhole surveys. The result locates your networks in plan and elevation in the project's coordinate system.

What you gain
  • Design based on the measured position of the networks
  • Fewer surprises during excavation
  • Foundations placed with full knowledge of what is below
Deliverables
pipe routing with alignment and elevationspoint cloud of trunk sewersDWG sections
Related project: Saint-Pierre collector sewer: underground 3D scanning

Do your as-built plans meet the municipality's requirements?

The problem

At the end of a road or sewer contract, the municipality requires as-built plans to its own standards. An incomplete or late survey delays acceptance of the work and payment of the contractor.

Our solution

We survey the structures during the work, before backfilling, then the final paving and curb surfaces. Plans are prepared to the municipality's requirements. For surveys that must be signed by a land surveyor, such as those of the City of Montreal (DTNI-12A), we coordinate the signature.

What you gain
  • Buried structures surveyed before they are covered
  • Easier acceptance of the work
  • Compliant record handed over to the owner
Deliverables
progressive surveysas-built plans (DWG and PDF)point lists by section
Related project: Henri-Bourassa Boulevard: layout and as-built plans

How do you keep everyone on the same control points during a street reconstruction?

The problem

On a street project, several crews follow one another: sewers, water mains, curbs, sidewalks, paving. If the control points differ from one crew to the next, slopes, connections and elevations no longer match.

Our solution

We establish or validate the site control network, then lay out pipes, chambers, curbs and sidewalks from those control points. Our surveyors can also reinforce the contractor's survey crew for the full duration of the work.

What you gain
  • Compliant slopes and connections
  • Surveying resources matched to the pace of the site
  • Less rework
Deliverables
site control networklayout of structuresfollow-up surveys
Related project: Notre-Dame Street East: surveyors backing up the contractor's team

What is the condition of the bottom and walls of your dam or retention basin?

The problem

Many municipalities own a dam, a weir or a retention basin. Before planning work or a hydraulic study, you need to know the bottom, the banks and the geometry of the structure, part of which is underwater.

Our solution

We combine bathymetry, GNSS surveying in shallow water and 3D scanning of the visible parts of the dam, the walls and nearby bridges. All the data is brought together in a single model.

What you gain
  • Complete picture of the structure in one campaign
  • Data directly usable by hydraulic engineers
  • Baseline for future surveys
Deliverables
XYZ point filepoint cloudsDWG 3D modeltechnical report
Related project: Éva-Dulude Dam: 3D survey and bathymetry in Farnham

How do you design a park, a laneway or a public square on an accurate base?

The problem

Redeveloping a public space involves irregular surfaces, trees, street furniture, private entrances and existing drainage. An incomplete topographic plan complicates grading and stormwater flow.

Our solution

We survey the site by total station, 3D scanning or drone LiDAR, depending on its size and vegetation, then deliver the topographic plan or 3D model the designers expect. Revisions requested by the borough are incorporated into the deliverable.

What you gain
  • Grading and drainage designed on measured ground
  • Easier discussions with residents and elected officials
  • Method suited to each site
Deliverables
DWG and PDF topographic planspoint cloud3D site model
Related project: Plateau-Mont-Royal green alleys: topographic surveys

How do you monitor a rock face or slope along a public road?

The problem

A rock face or slope along a street can change from one year to the next. Without a baseline survey, it is hard to measure a change and decide on an intervention.

Our solution

We survey the face by mobile LiDAR or scanning, tying in to the municipality's control points, then repeat the survey in the same system. Successive point clouds can be compared directly.

What you gain
  • Survey without a prolonged road closure
  • Data comparable from one year to the next
  • Decisions backed by measurements
Deliverables
registered point cloud (E57)coordinates of the control stationscomparison between two surveys
Related project: Camillien-Houde Way: the pass's rock faces in mobile LiDAR

Our solutions for your sector

What we take care of

Build a georeferenced inventory of your streets and surface assets

We drive your road network with a mobile mapping vehicle, without prolonged traffic disruption. Catch basins, manholes, fire hydrants, poles, signs, curbs and sidewalks are extracted from the point cloud and 360 images, then delivered as GIS layers. Your team has a complete, dated and searchable visual record of the right-of-way.

  • Inventory covering the entire target area
  • Data ready for your GIS and your asset management plan
  • 360 images viewable by municipal departments
Mobile mapping

Locate and document underground networks

Before design or excavation, we locate your pipes and trunk sewers. Surface detection by ground-penetrating radar picks up buried networks. 3D scanning of trunk sewers, culverts and manholes, done from the surface whenever possible, provides their precise geometry. The data is brought together in the project's coordinate system.

  • Position and depth of networks known before digging
  • Geometry of older structures documented
  • Fewer conflicts between design and field conditions
Underground infrastructure

Support road, water main and sewer work

For contractors carrying out municipal contracts, our surveyors lay out pipes, chambers, curbs, sidewalks and paving, then survey the structures as the work progresses. We join your team as needed, on a purchase-order basis or for the full duration of the project, and deliver as-built plans to the municipality's standards.

  • Surveying available at the pace of the site
  • Surveys done before backfilling
  • Final plans that meet municipal requirements
Construction surveying

Survey municipal hydraulic structures

Dams, weirs, retention basins, rivers and banks: we survey the bottom by bathymetry and the visible surfaces by 3D scanning or drone LiDAR, in a single campaign. Hydraulic engineers and engineers receive a complete model of the structure and its surroundings, to plan the work or update studies.

  • Structure documented above and below the water
  • A single supplier for data that fits together
  • Reusable baseline for future surveys
Bathymetry

Prepare your urban design projects

Green laneways, parks, public squares, bike paths and footbridges: we survey the site with the best-suited method, from total station to drone LiDAR, then deliver the topographic plans and 3D models the designers need. During construction, we lay out the structures from the same control points.

  • Design based on existing ground
  • Models useful for presenting the project
  • Continuity between survey, design and layout
Aerial surveys

Products and deliverables

Deliverables ready to use

Asset inventory in GIS layers

Identify and locate surface assets. For: incomplete or outdated records.

Classified point cloud and 360 images

Document the right-of-way continuously. For: repeated field visits.

Underground network routing (plan and elevations)

Locate pipes and trunk sewers. For: approximate network drawings.

As-built plans (DWG and PDF)

Document the completed structures. For: work not accepted for lack of plans.

Layout and site control network

Place structures on common control points. For: mismatched slopes and connections.

3D model of a hydraulic structure and report

Describe the bottom, walls and banks. For: unknown underwater geometry.

Topographic plan and 3D site model

Support the design of a public space. For: uncertain grading and drainage.

Comparison of successive surveys

Measure changes in a rock face or slope. For: unquantified changes.

Need another format or deliverable?

Tell us which software and standards you use: we prepare the delivery accordingly.

Request a quote →

Our projects · Municipalities and urban networks

Completed projects

Roads, networks and hydraulic structures: three projects completed for municipalities and for the contractors who work for them.

Why choose Topo3D?

One partner, from the first grid line to the as-built

  • Hands-on experience with municipal contractsOur surveyors work on street, sidewalk and network projects for contractors of the City of Montreal and other municipalities. They know the as-built plan requirements and the pace of these projects.
  • Every scale of the municipal territoryA manhole, a laneway, a trunk sewer, a dam or an entire road network. We choose the method based on what needs to be measured, from total station to mobile LiDAR.
  • Data ready for your systemsGIS layers, DWG, E57 or LAS point clouds, georeferenced in the municipality's coordinate system. Your departments integrate them without reprocessing.
  • A single contact for combined projectsWhen a project also requires bathymetry, utility detection or a survey signed by a land surveyor, Topo3D coordinates the parties involved and delivers a consistent record.

Frequently asked questions

How does a survey help a municipality prepare its water asset management plan?

The water asset management plan (PGA-Eau) requires knowing which structures the municipality owns and where they are. Topo3D surveys and georeferences the visible assets, such as manholes, catch basins and fire hydrants, and delivers a GIS-ready inventory. Assessing condition, risk and priorities remains the job of the municipality's engineer or asset manager.

What is a mobile LiDAR asset inventory?

A vehicle fitted with a LiDAR sensor and cameras drives the streets and records a point cloud and georeferenced 360 images. At the office, Topo3D extracts the right-of-way assets from this data: signs, poles, catch basins, curbs, sidewalks. This method covers a municipal road network much faster than a survey on foot, without prolonged traffic disruption.

Can you produce the as-built plans required by the City of Montreal?

Yes. Topo3D surveys the structures during the work, before backfilling, then the final surfaces, and prepares the as-built plans to the City's requirements. We did this on Henri-Bourassa Boulevard, among others. For progressive surveys that must be signed by a land surveyor, such as those under DTNI-12A, Topo3D coordinates the signature with a land surveyor.

How do you locate a pipe or trunk sewer before excavating?

Several methods are usually combined: surface detection by ground-penetrating radar, manhole surveys and, for large structures, 3D scanning of the inside of the trunk sewer. Topo3D brings this data together in the project's coordinate system. The designer gets the position of the networks in plan and elevation, which reduces surprises when digging begins.

Can the bottom of a municipal dam's retention basin be surveyed?

Yes. Topo3D combines bathymetry, GNSS surveying in shallow water and 3D scanning of the visible parts of the structure. In Farnham, Quebec, this approach was used to document the basin and the riverbed around the Éva-Dulude Dam. The result is a 3D model and point files that can be used for hydraulic analyses and work planning.

Related sectors

Header photo: Denis Tremblay / Parcours riverain – Ville de Montréal, CC BY 2.0 (rue Notre-Dame Est avant les travaux)

Get a measured picture of your infrastructure

Quick reply
Quote within 24 to 48 hours

What service(s) are you requesting?
Attach files (optional): drawings, specifications, photosPDF, DWG, DXF, JPG, PNG or ZIP · up to 5 files, 15 MB each. Larger? Share a WeTransfer or Drive link in the message.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.